Compare three professional INNO fusion splicers side by side in a premium modern layout designed for fibre engineers, telecom contractors, FTTx deployment teams, network installers and broadband infrastructure specialists. This comparison highlights the INNO M7+, INNO View 8X and INNO M9+ across alignment method, splice performance, screen size, memory, battery capability, dimensions, portability, fibre compatibility and field usability.
Compact Active V-Groove Clad Alignment fusion splicer designed for professional fibre splicing and everyday field deployment.
Premium core alignment fusion splicer built for advanced fibre work, higher capacity operation and larger-screen visibility in the field.
Compact core alignment fusion splicer combining fast splice performance and portable form factor.
Use this comparison table to quickly assess which INNO fusion splicer best fits your fibre deployment, fibre optic maintenance, FTTx build, network installation, data centre cabling, telecom engineering or contractor workflow.
| Specification | M7+ | View 8X | M9+ |
|---|---|---|---|
| Product type | Compact Active V-Groove Clad Alignment Fusion Splicer | Premium Core Alignment Fusion Splicer | Compact Core Alignment Fusion Splicer |
| Alignment method | Active V-Groove Clad Alignment | Core Alignment | Core Alignment |
| Number of fibres | Single | Single | Single |
| Applicable fibres | SM, MM, DS, NZDS, CS, EDF | SM, MM, DS, NZDS | SM, MM, DS, NZDS, CS, EDF |
| Coating diameter | 100μm – 3mm | Please confirm from final product page if required | 100μm – 3mm |
| Cladding diameter | 80 – 150μm | 80 – 150μm | 80 – 150μm |
| Cleave length | 5 – 16mm | 5 – 16mm | 5 – 16mm |
| Typical splice loss | SM 0.03dB / MM 0.01dB / DS 0.05dB / NZDS 0.05dB / G.657 0.03dB | SM 0.01dB / MM 0.01dB / DS 0.03dB / NZDS 0.03dB / G.657 0.01dB | SM 0.02dB / MM 0.01dB / DS 0.03dB / NZDS 0.03dB / G.657 0.02dB |
| Return loss | > 60dB | N/A | > 60dB |
| Splice time | Quick mode avg. 4 sec / SM mode avg. 5 sec | Premium fast-splicing performance | Quick mode avg. 4 sec / SM mode avg. 5 sec / Auto mode avg. 7 sec |
| Splice programmes | Max 128 modes | Max 300 modes | Max 300 modes |
| Automatic calibration | Automatic Arc Calibration by air pressure & temperature | Automatic Arc Calibration by air pressure & temperature | Automatic Arc Calibration by air pressure & temperature |
| Electrode life span | 6000 arc discharges | 6000 arc discharges | 6000 arc discharges |
| Heating programmes | Max 32 modes | Max 100 modes | Max 100 modes |
| Heating time | Quick 9 sec / Average 13 sec | High-speed heating design | Quick 9 sec / Average 13 sec |
| Protection sleeve | 20mm – 60mm | N/A | 20mm – 60mm |
| Data output | Cloud (View Pro Manager) + USB-C | Cloud (View Pro Manager) + USB-C | Cloud (View Pro Manager) + USB-C |
| Splice memory | 20,000 splice data / 10,000 splice image | 20,000 splice data / 10,000 splice image | 20,000 splice data / 10,000 splice image |
| Battery | 3000mAh / 200 cycles | 9000mAh / 500 cycles | 3000mAh / 200 cycles |
| Power supply | AC 100–240V / DC 9–19V | Not shown here | AC 100–240V / DC 9–14V |
| Monitor | 4.3" colour LCD, full touch screen | 5.0" colour LCD, full touch screen | 4.3" colour LCD, full touch screen |
| Magnification | x320 | x360 / x520 | x320 |
| Size | 124 x 144 x 131mm | 162 x 143 x 158mm | 125 x 144 x 136mm |
| Weight | 1.49kg | 2.68kg | 1.63kg |
| Pull test | 1.96 – 2.25N | Not shown here | 1.96 – 2.25N |
| Operating conditions | Altitude 0–5000m / humidity 0–95% / temperature -10 to 50°C / wind up to 15m/sec | Altitude 0–5000m / humidity 0–95% / wind up to 15m/sec | Altitude 0–5000m / humidity 0–95% / temperature -10 to 50°C / wind up to 15m/sec |
| Storage conditions | Humidity 0–95% / temperature -40 to 80°C | Humidity 0–95% / temperature -40 to 80°C | Humidity 0–95% / temperature -40 to 80°C |
| Resistance tests | Water resistance IPx2 / shock resistance 76cm drop / dust resistance IP5X | Rugged field-use environmental testing | Water resistance IPx2 / shock resistance 76cm drop / dust resistance IP5X |
Whether you are comparing a compact fusion splicer for routine FTTH work or a premium core alignment splicer for demanding network builds, this section gives the page strong search relevance while still reading naturally for engineers, buyers and procurement teams.
The INNO M7+, INNO View 8X and INNO M9+ each offer strong benefits for fibre optic splicing, but they suit different operational priorities. The M7+ is ideal for teams that want a compact professional fusion splicer with Active V-Groove Clad Alignment, fast splice performance and a lightweight field-ready format. The View 8X is positioned as the premium choice for engineers needing core alignment performance, larger-screen visibility, higher magnification and a high-capacity battery for longer deployment cycles. The M9+ delivers compact core alignment performance with broad fibre compatibility, fast splicing, robust memory and a portable format for telecom installation teams, fibre network contractors and maintenance engineers.
This page is also designed to support search intent around fusion splicer comparison, INNO splicer review, fibre splicing machine, fibre optic fusion splicer, core alignment splicer, cladding alignment splicer, FTTH splicer, telecom splicing equipment, fibre network installation tools, fusion splicer demo, fibre optic test equipment, contractor splicer, broadband deployment tools and professional fibre engineering equipment.
Request a live product demo, technical consultation, pricing support or help choosing the best INNO fusion splicer for FTTH, FTTx, telecom, data centre or network installation work.
Complete the splicing setup with complementary fibre preparation and field support products that work well alongside the INNO splicer range.
